Delaware Quilts

Road to California

For the Road to California you will need:
From your choice of light cut two 4 7/8 inch squares and a 2 1/2 inch strip
From your choice of darkcut two 4 7/8 inch squares and one 2 1/2 inch strip


Step one: Sew, right sides together, your 2 1/2 inch strips. Cut into ten 2 1/2 inch segments.

Sew together into five four-patch blocks.

Step two: Place a dark block and a light block right sides together. Carefully draw a line down the center, corner to corner, diagonally across the block. (This will be a cutting line when you are finished.)

If you have a true 1/4 inch foot on your machine, you can sew on either side of this drawn line. If not, you will have to draw a second line on either side, exactly 1/4 inch from the first line. This will be your sewing line.

After you have sewn on your sewing line, 1/4 inch on either side of your corner to corner to line, you will cut this square in half on your cutting line. Don't forget to trim your corners off. You will now have two diagonal half-squares, which should measure exactly 4 1/2 inches. Repeat with second set of 4 7/8 inch squares.


Step three: Make two sets like this

Step four: Make one set like this.

Sew the sets together in order.

Road to California © Delaware Quilts March 2000
The content on these pages, including text and images are the sole property of the Delaware Quilts and may not be used or reproduced in any manner without consent. All Rights Reserved.

Updated June 8, 2020

|Home| Quilts| Blocks| Retreat| Email|